Original idlers for Anet A8 3D printer

Original idlers for Anet A8 3D printer

Genuine idlers for Anet A8 3D printer.

You get both (1) and (2) idlers

3d printed minion Dave keychain

3d printed minion Dave keychain

my daughter printed minion with Anet a8 3D printer and painted with acrylic paint.

you can download stl file here

arduino fps game controller shotgun for overwatch, battle ground, the house of the dead.

arduino fps game controller shotgun for overwatch, battle ground, the house of the dead.

Continuous ink supply system for HP photosmart B110a, HP officejet 6000, 6500 printers

You can buy by clicking the below button.
You have to let me know the printer model because of CISS CHIPS.

Continuous ink supply system for HP photosmart B110a, HP officejet 6000, 6500 printers

Installation

Insert syringe into the hole on the cartridges and pull out the air then ink will be filled in the cartridges.

cover the holes with rubber caps.

attach clips like the below picture.

fix the tube on the clips.

ink surface level in rear space of the ink tank should be less than 2cm from the bottom.
To do that, you close all the rubber caps and lean the front facing ink tank on the bottom and place ink tank  slowly then ink level will be low.

Try tube as free as not be to be caught in the printer.
If tube is caught in the printer, you will get error message.

After finishing installtion, try to clean printhead in the printer menu on the printer for clear printing quality.


How to set up a constant low ink pressure (very important)

then leave the four air holes open.

Inktec pigment ink for HP 940,950,933,952 cartridge

Inktec pigment ink for HP 940,950,933,952 cartridge refill and CISS ink refill

pigment ink for hp 950, 952 cartridges 

BUY From Ebay.


This ink is made in South Korea and widely used in CISS and cartridge refill.
Each bottle is 1 liter.
You can refill cartridges and CISS for following printers.

HP Officejet Pro 8000, 8100, 8000dn, 8000dwn,
HP Officejet Pro 8500, 8500A, 8600, 8610, 8615, 8620, 8630, 8640, 8660
HP Officejet Pro 251dw, 276dw
HP Officejet 7110, 7610
HP Officejet 7110, 7610
HP Officejet 6100, 6600, 6700, 7510, 7612


Do not use this ink for other models.

heated bed for Anet A8 3d printer

              Anet a8 heated bed.

This is original heated bed of Anet A8 3D printer.
You get the product just like above including cable.

it requires and supports 12V

Bed size: 220mm x220mm.
heated bed wire is 90cm.

We only ship to US.  Shipping cost is included with the product.

• Items will be shipped by standard shipping within 24-48 hours after payment confirmed, except weekend (Saturday and Sunday) and South Korean official holidays.

• Items will be shipped directly from South Korea or China. Shipping time to US will be one to two weeks depending on your location.

The shipping time may be varied due to customs random inspection, post office's delay, weekend, holiday break or abnormal weather factors.

Buyers Note:

• Import duties, taxes and charges are the buyer's responsibility when they occurred.

• The items will be shipped to your paypal address only. Paypal address and shipping address should be the same.

Payment:

• Payment method: We only accept PayPal

• The payment shall be made within 7 days after the transaction is completed. If the payment is not paid after 7 days, we can cancel your order.

Warranty:

• All products is subject to one month warranty period

• Defective item should be returned to us within an month. Only defective product will be offered exchange or refund.

• Please write down "Product for Return" on the Customs Declaration Form when you send it back to us.

Contact Us:

If you have any questions regarding the products and the problem please contact us by dumbinlove@gmail.com. We will response you within 24 hours.

Carriage for Anet A8 3D printer

Buy from Ebay


Carriage for Anet A8 3D printer

Hot Bed fixed aluminum plate

This is original carriage of Anet A8 3D printer.
You get the product just like above 

We only ship to US.  Shipping cost is included with the product.

• Items will be shipped by standard shipping within 24-48 hours after payment confirmed, except weekend (Saturday and Sunday) and South Korean official holidays.

• Items will be shipped directly from South Korea or China. Shipping time to US will be one to two weeks depending on your location.

The shipping time may be varied due to customs random inspection, post office's delay, weekend, holiday break or abnormal weather factors.

Buyers Note:

• Import duties, taxes and charges are the buyer's responsibility when they occurred.

• The items will be shipped to your paypal address only. Paypal address and shipping address should be the same.

Payment:

• Payment method: We only accept PayPal

• The payment shall be made within 7 days after the transaction is completed. If the payment is not paid after 7 days, we can cancel your order.

Warranty:

• All products is subject to one month warranty period

• Defective item should be returned to us within an month. Only defective product will be offered exchange or refund.

• Please write down "Product for Return" on the Customs Declaration Form when you send it back to us.

Contact Us:

If you have any questions regarding the products and the problem please contact us by dumbinlove@gmail.com. We will response you within 24 hours.